Ductbond High Velocity Duct Sealant

Part Number: 1DUCTBONDG

Ductbond is a high velocity duct sealant, tested to ASTM G-21, with a rating = 0 (no fungal growth on surface).
Water based for personal and environmental safety. Resistant to fire, oxidation, cracking, moisture and water. Creates a permanent flexible seal and is suitable for high, medium or low pressure applications. Ductbond is a neutral metallic grey colour and is quick and easy to clean-up. Quality non-flammable water based, high velocity duct sealant seals joints and openings in galvanized steel, aluminum, and other metal ductwork. Sets up quickly and forms a strong, permanently flexible, air-tight seal. Brush grade grey metallic, emulsion based duct sealant is easily applied and suitable for all high, medium and low pressure air handling systems.

This UL listed duct sealant is tested to ASTM E84 and meets NFPA 90A and 90B 25/50 requirements. UV rated, fire resistant, water based, non toxic VOC rated and inhibits mold and mildew growth.

Application
All surfaces must be clean, dry and free of dirt, oil or grease prior to application. For best results use fiberglass duct scrim tape. Apply duct sealant with brush, trowel, or caulking gun (extrusion). Do not apply sealant in temperatures below 4°C (40°F). Keep from freezing. Store in a cool, dry and well ventilated area.
Fungal Growth Resistance: (ASTM G 21) Rating=0, no fungal growth on surface
Wet Flammability: Flash point (closed cup), no flash to boiling. ASTM D 3828.
Drying Time: To touch 1 hour, dry through 16 hours, at 23°C (73°F) 50% RH ASTM D1640.
Clean-up: Wash tools in warm soapy water
Air Pressure Resistance: Pressure withstood: 10” WG (2500 PA). Dry time 24 hours.
Service Temperature Range: -7°C (20°F) to 93°C (200°F).
Certified: Ductbond High Velocity Sealant is UL listed and meets NFPA Standards 90-A and 90-B 25/50 requirements. This product is tested in accordance to ASTM E-84 (Surface Burning Characteristics of Building Materials).

Please refer to the material safety data sheet for more detailed information.

The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Novaflex. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.

The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.

Website Design and Development By Red Leaf Development

Novaflex® Industrial Ducting

Novaflex® Industrial Hose

Uni-CHEM® Composite Hose

HDC® Hi-Flow Dry Release® Couplings

JLA Marine Loading Arms

Ductbond High Velocity Duct Sealant