Novaflex
Getting the most from a single source.
High Temperature

Uni-FLON HT

Part Number: Uni-FLON HT
High Temperature Composite Hose
This high temperature version of Novaflex's standard Uni-FLON composite hose is manufactured with a proprietary combination of materials that give superior strength at elevated temperatures. Rated for full vacuum.

Uni-FLON SG
Uni-FLON SS
Available in diameters from 1" to 5"
Operating Temperature: -40°F to +250°F (-40°C to +121°C)
Standard length: 100 ft. ( 10" - 80ft)
Cover: Red

Uni-CHEM® Composite Hose are manufactured in compliance with BS 5842 and are available with EN 13765 compliant construction. Marine Service Applications: All Uni-CHEM® hose styles are constructed to marine service specifications in accordance with US Coast Guard spec.154.500 and I.M.O regulations.

WARNING!
Elevated temperatures can change the chemical resistance rating of hose. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the polypropylene tube at the temperature & concentrations listed.
Most chemicals become more aggressive the higher the temperature, reducing the ability of the tube material to withstand them.
Compatibility information is available from Novaflex.
If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.
Never use Novaflex Composite Hose above the ratings listed by Novaflex.
Uni-FLON HT
Uni-FLON HT
Home| Company| Quotes| Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Novaflex. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.

The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.

Website Design and Development By Red Leaf Development