Novaflex
Getting the most from a single source.
Garage Exhaust / Indoor Fume Control

U-Lok 401

Part Number: 3UL401X
The combination of standard external helix as a scuff guard and a non-glue construction results in the industry standard high-temperature hose.
 
Applications
Automobile exhaust hose reel

Gas exhaust control

Hot fume control

Hot air supply and removal

Not recommended for diesel applications.


A negative pressure fan system with ambient air inlet is recommended to maximize effectiveness and life of duct. It is important to size the duct diameter according to the exhaust output.


Construction:
Product code: 3UL401X
Material: Fiberglass/Silicone
Construction: Mechanical bond, corrosion resistant helix.
Diameters: 2” to 24” I.D.
Bend radius: = 1.5”x I.D.
Weight: 6” I.D. = 1.1 lbs/ft.
Length: 25 ft.
Compression Ratio: 5:1
Temperature range: -65°F to +500°F intermittent.
Colour: Metallic Grey 


*Also available with stainless steel helix

U-Lok 401
U-Lok 401
Home| Company| Quotes| Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Novaflex. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.

The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.

Website Design and Development By Red Leaf Development